Modular-15

Extremely flexible, the Modular Series is innovative with its combination of array point source systems and multifunctional usable individual loudspeakers. As well as being used as a single full-range loudspeaker, with high-performance head with bass support and high-performance monitor on stage, the Modular range is also designed to be used with multiple units side-by-side, in a horizontal array design.

Any interference and associated sound interruptions between the sound sources are reduced to a minimum by using special housing geometry, suitable for the narrower beam angle of the rotatable horn. Each horn operates only in its defined sound direction. This technology gives the user an even greater range of applications with only one speaker model and is registered with the patent office.

"Easyfly", (also registered with the Patent Office), is a new "one-click" mechanism that allows tool-free suspension and precise alignment in seconds. The mechanism is more elegant and smaller than a conventional rigging stay. The Modular series is equipped with inconspicuous mounting rails on two sides of the enclosure. This means that the speaker can be hung or flown upright or horizontally using the "Easyfly" mechanism. At the back, there is a third mounting rail for the mandatory safety cable.

For accurate alignment on a tripod or mounting pole, the Modular series has an internal, tiltable pole that allows a +/- 18° tilt adjustment.

The Modular-15 uses a 15" chassis of the latest generation and has been specially designed for a clean, detailed midrange with a high, undistorted sound pressure. A particularly low moving mass (mms 100g) in combination with the extremely powerful neodymium driver (B/L factor 26), ensures the combination of the good transmission characteristics of a 12" model with the large diaphragm surface and the associated sound pressure of a 15". low. This is made possible by the large 4" voice coil and elaborate ventilation openings in the magnet system. The aluminum demodulation rings in the magnet system ensure low distortion.

For installation, the Modular-15 is supplied with the "Easyfly" mechanics, 12 pivoting wall brackets or the internal M10 threaded steel internal angles.

The Modular-15 can then be converted in our factory to the self-powered version with power amplifier module and DSP board.

Control.

The Modular-15 is bi-amped on two channels (2400 W/4 Ω + 450 W/8 Ω) in the HDSP-6 system amplifier. This allows both paths to be separately limited, optimally filtered, differences in transit times can be compensated and interchangeable horns with different beam angles can be used.

The woofer is designed in 8 Ω and the tweeter in 16 Ω.

Two Modular-15s can be connected to a 4-pin. Cables can be pulled through and driven in parallel by the same amplifier channels. Up to four Modular-15 bi-amps can be connected to one HDSP-6.

• 15"/1.4" scalable multifunctional loudspeaker
• Radiation output with rotatable horns 90° x 60° or 60° x 40°
• Horizontal array options with interference minimization with 60° x 40° horn
• Click-in flyware, tool-free flight mechanics